• Product ID
    999881193121
  • Size
    265x200x50 mm
  • Weight
    0.53 kg

Main features:
  • GPRS data transfer
  • Built-in GPS receiver
  • WEB display
  • Connectible to car alarms
  • Programmable through USB and IP
FULL version functions:
  • RPM monitoring from alternator star point
  • RPM monitoring from alternator power terminals - using interface
  • Data inputs: F1, F2, TEMP (fuel probes, temperature sensors)
  • Outputs: POWER OUT (for accessories)
  • CAN Adapter support
Technical data:
  • Transmission frequency:
    GSM 900/1800 MHz
  • Supply voltage:
    10-28 VDC
  • Current consumption:
    Nominal: 120mA
    Maximum: 500mA
    Standby: ≈20mA@12VDC
  • Operating temperature:
    -20°C - +70°C
  • Dimensions:
    82 x 125 x 40mm
  • GPS antenna dimensions:
    50 x 38 x 17mm
  • Weight: 200g
Characteristics of the system:
  • Visualization and log of the position and route
  • Separation of business/private routes
  • Evaluation of the speed, parking, duration of passage, etc.
  • Sends SMS containing the current vehicle position and its traffic data
  • At the effect of events:
    - Forwards car alarm signals to monitoring station
    - Sends SMS to the user’s phone
  • Independent alarm functions, e.g.: supervises changes of the position when engine is not running, alarms initiated by contacts on the inputs
Operational options
  • Web server service - www.easytrackmap.com
    or
  • Individual server for monitoring station
  • Web display on Google Maps™ surface
  • Private POI management, speed and fuel diagram, route report, vehicle uptime report, refueling report
  • Low operational cost

Technical specification
  • GPS receiver dimensions
    50x38x17 mm
  • GSM band
    900/1800 MHz
  • GSM phone type
    SIMCOM SIM900
  • SIMCOM
    SIM900
  • Dimensions
    82x125x40 mm
  • Operation temperature
    -20 C - +70 C
  • Weight
    200g
  • Supply voltage
    10-28 VDC
Current consumption
  • Standby
    ≈20mA@12VDC
  • Maximum
    500mA
  • Nominal
    120mA
Functions
  • CAN Adapter connectivity
    Yes
  • Diesel Sensor connectivity
    Yes
  • easyFCL connectivity
    Yes
  • easyFMS connectivity
    Yes
  • easyRPM Monitor II connectivity
    Yes
  • easyTEMP connectivity
    Yes
  • POWER OUT output
    Yes
  • Sending position and traffic data in SMS message
    Yes
  • Position and route display and recording
    Yes
  • RPM detection from alternator star-point
    Yes
  • Evaluation of speed, parking, duration of journey, etc..
    Yes
Effect of events
  • Forwarding of vehicle's alarm system signals to monitoring station
    Yes
  • Sends SMS to the user's phone
    Yes
1. The device is not connecting to the GPRS net. Why?

Check the APN settings, the power supply and power requirements of the module, as well as the GSM antenna connection and signal strength.

2. The module sends a long line of continuous letter / sequence SMS message to the SMS forwarding featured phone number. What is the reason for this?

This phenomenon happens when you do not receive a regular SMS( text) to the phone module, but some kind of multimedia message (MMS photo) or some other encoded message (for example, encoded Cyrillic letters with accents or other capitalization). An industrial phone module cannot handle this; therefore, the mentioned letter/ sequences converts it into a Unicode form and forwards it, in this case (depending on the size of the message it can send 1 MMS in 3 or 4 SMS). The device is not broken; just what we described above causes this phenomenon. If this occurs regularly, it suggests that it is an advertising / marketing message from the service provider. Because these are real messages, there is not much that you can do against this; maybe it is possible to ban this messages by the service provider or you can turn off the message forwarding function (in the settings: delete the SMS forwarding phone number), if this is not absolutely necessary.